Roland VersaCAMM VS Series

The Roland VS Series provides the versatility your shop needs to succeed. Watch the videos below to learn how to keep your machine running efficiently.

Uploaded: 6/20/2016
When using white ink as a base layer, decorators will ensure a more vibrant print. In this video, Stahls' TV educator Joe Burt will show apparel decorators how to set up white ink for the Roland® VersaCAMM® VSi Series for specific print jobs.
$0.00

Uploaded: 4/12/2016
In this live broadcast, STAHLS' TV Presenter, Mike Koval walks you through each step of the print/cut process. Learn how to start designing, send to your printer/cutter, print, and finally cut your designs to be heat printed onto any item.
$0.00

Uploaded: 8/27/2015
Looking to expand beyond the basics with Roland VersaWorks™? Join Phil Tarcy as he shows you how to take full advantage of the capabilities of your Roland printer with higher level functions and software troubleshooting tips.
$0.00

Uploaded: 7/14/2015
Looking to maximize your profit with your Roland Versacamm? In this live classroom, Stahls' TV educator Bob Robinson will teach the steps to maximizing time and profit with this versatile print and cut machine.

ASI Approved

$0.00

Uploaded: 7/2/2015
In this video, Stahls' TV Educator, Steven Jackson, shows you how to manually perform a cleaning cycle on your Roland VS-300. Watch to learn about the normal, medium, and heavy cleaning cycles that are available to you.
$0.00

Uploaded: 6/4/2015
When printing thicker materials, you may find that you need to adjust your head height to ensure a proper cut and a good quality print. In this video, Stahls' TV Presenter, Chad Pool, shows you just how simple it is to adjust the head hight in the Roland® VersaCAMM® print/cut machine.
$0.00

Uploaded: 6/4/2015
Is your Roland® VersaCAMM® machine not cutting, dragging the material, or bunching up in the system? If you answered yes to any of these, then it might be time to replace your blade! In this video, Stahls' TV Presenter, Chad Pool, shows you just how simple replacing the sheet cut blade on the Roland® VersaCAMM® can be.
$0.00

Uploaded: 6/4/2015
From time-to-time, you may experience less than perfect prints from your Roland® VersaCAMM® due to a clogged nozzle. In this video, Stahls' TV educator Chad Pool shows you how to perform a head soak to get your machine back on track.
$0.00

Uploaded: 2/17/2015
A Roland® VersaCAMM® print/cut machine is perfect for creating digital heat transfers for apparel decorating. In this Live Classroom presented by Bob Robinson, you'll learn the process of printing on heat transfer material and decorating a variety of items with various finishes.
$0.00

Uploaded: 12/9/2014
In this live broadcast, STAHLS' TV Presenter, Mike Koval walks you through each step of the print/cut process. Learn how to start designing, send to your printer/cutter, print, and finally cut your designs to be heat printed onto any item.
$0.00

Uploaded: 11/14/2014
Before sending a job to your Roland print/cut machine, you should perform a test cut to ensure your blade is cutting with the proper amount of downforce. STAHLS' TV Presenter, Steven Jackson shows you how to perform a test cut and adjust to get a perfect cut.
$0.00

Uploaded: 11/14/2014
When changing the blade angle on your Roland print/cut system, you need to adjust the offset on your machine to ensure the machine is cutting accurately. STAHLS' TV Presenter, Steven Jackson demonstrates how to set the offset correctly and perform a test cut.
$0.00

Uploaded: 11/14/2014
To keep your Roland print/cut machine operating correctly, you need to perform a manual cleaning weekly. STAHLS' TV Presenter, Steven Jackson demonstrates how to easily clean areas of your machine like print heads to keep your machine operating and printing correctly.
$0.00

Uploaded: 11/14/2014
For cutting materials that have been removed from the machine after printing, you will need to utilize the Crop Cut Adjustment feature on your Roland print/cut machine. STAHLS' TV Presenter, Steven Jackson demonstrates how to utilize the crop cut adjustment on your machine to register cut lines around your design.
$0.00

Uploaded: 11/14/2014
To keep the blade in your Roland print/cut machine rotating freely and cutting accurately, you may need to clean debris from your blade holder assembly. STAHLS' TV Presenter, Steven Jackson demonstrates how to remove and clean your blade holder.
$0.00

Uploaded: 11/12/2014
Over time, the media clamps on your Roland print/cut machine can develop adhesive residue. STAHLS' TV Presenter, Steven Jackson shows you how to clean adhesive from your media clamps.
$0.00

Uploaded: 11/12/2014
As the blades wear down on your Roland VS-Series print/cut machine, you will need to replace them to maintain accurate contour and sheet cutting . STAHLS' TV Presenter, Steven Jackson demonstrates how to easily remove and replace the sheet cut and contour cutting blade in your machine.
$0.00

Uploaded: 11/12/2014
The encoder strip is a crucial part in the communication between your Roland VS-Series print/cut machine and the print head. If the encoder strip gets dust or debris on it, it can cause the machine to misfire and damage your print. STAHLS' TV Presenter, Steven Jackson shows you how to clean your encoder strip to save your shop from ruined prints.
$0.00

Uploaded: 11/12/2014
Keeping your Roland print/cut machine free of dust & debris, can help ensure your prints are flawless. In this video, STAHLS' TV Presenter, Steven Jackson gives you general tips on cleaning your print/cut machine.
$0.00

Uploaded: 11/11/2014
When the media jams up in a Roland VersaCAMM printer, this can cause a print head strike. STAHLS' TV Presenter, Steven Jackson walks you through how to easily correct a print head strike on your machine
$0.00

Uploaded: 11/11/2014
Keep prints looking flawless with continued cleaning around your print head and receiver area to ensure dust and debris doesn't begin to develop. STAHLS' TV Presenter, Steven Jackson demonstrates how to clean these areas properly for perfect prints every time.
$0.00

Uploaded: 11/11/2014
Over time, your Roland VS-series printer will require you to replace some parts in order to keep your machine functioning properly. STAHLS' TV Presenter, Steven Jackson shows you how to easily replace your wipers on the Roland VS-Series print/cut machine.
$0.00

Uploaded: 11/11/2014
If your material cuts have jagged edges and your Roland VS-300 is not cutting cleanly, it may be time to replace your cutter protection strip. In this video, STAHLS' TV Presenter, Steven Jackson shows you how to recognize when your cutter protection strip is too worn and how to replace it.
$0.00

Uploaded: 11/11/2014
When the drain bottle on your Roland VS-300 reaches its max capacity, your machine will alert you to replace it. In this video, STAHLS' TV Presenter, Steven Jackson shows you how to check your drain bottle and replace it when needed.
$0.00