Roland BN-20

 
 

Uploaded: 6/16/2016
One half of the print/cut process is the "cut". Once you receive your BN-20, you will need to assemble your blade holder appropriately. In this video, Stahls' TV educator Chad Pool will show BN-20 owners how to properly assemble the blade holder for the first time.
FREE

Uploaded: 6/16/2016
Replacing the cutting strip on the Roland® BN-20 is a maintenance job that needs done after extended use. In this video, Stahls' TV educator Joe Burt shows BN-20 owners how to replace the cutting strip on their machine, including everything you will need to get the job done.
FREE

Uploaded: 5/17/2016
For full color graphics without the headache and extreme versatility in your decorated apparel business, the print/cut technology of the Roland® BN 20 can be the perfect addition to your shop. In this video, Stahls' TV educator Mike Koval shows decorators how they can use the capabilities of the Roland® BN 20 to take their business to the next level.
FREE

Uploaded: 2/16/2016
Print/cut machines are ideal for creating vibrant, easy to apply, full-color graphics... but they're not perfect. In this video, Stahls' TV Educator Joe Burt teaches decorators about the importance of creating a bleed zone during the art creation process and how to apply one to your graphic.
FREE

Uploaded: 2/4/2016
In this video, Stahls' TV Educators Joe Burt and Chad Pool discuss the Roland® VersaStudio BN-20 print/cut machine, and go over the 5 most common questions they get from their customers. Learn the answers to technical problems, get advice on this versatile machine, and find out new ways to do maintenance on the BN-20 in this video.
FREE

Uploaded: 9/17/2015
Occasionally your Roland® VersaStudio BN-20 will prompt you with the message that your waste tank is full. In this video, Stahls' TV Educator Joe Burt will show you how to resolve this message by replacing the waste tank quickly and easily.
FREE

Uploaded: 7/6/2015
Replacing your cap top or your capping station does not have to be a difficult process. In this video, Stahls' TV presenter Joe Burt will show you the easiest way to change this on your Roland® VersaStudio BN-20 when the time comes.
FREE

Uploaded: 7/6/2015
Want to get the most out of your Roland® VersaStudio BN-20? In this video, Stahls' TV presenter Joe Burt will give you some tips and tricks in order to ensure the most precise and accurate cut on your machine.
FREE

Uploaded: 7/6/2015
If you have the advantage of owning both the Roland® VersaStudio BN-20 and a Roland® VersaCAMM®, then you will be able to complete your jobs quickly and more efficiently. In this video, Stahls' TV presenter Joe Burt will show you how you can set up your graphic in Versaworks Studio with crop marks in order to utilize both machines.
FREE

Uploaded: 7/6/2015
After assembling your Roland® VersaStudio BN-20 stand, it is time to place the machine on it. In this video, Stahls' TV presenter Joe Burt will show you the easiest and safest way to place your machine on the stand.
FREE

Uploaded: 7/6/2015
Looking for a faster way to load media into your Roland® VersaStudio BN-20? In this video, Stahls' TV presenter Joe Burt shows you some tips and tricks for loading media into your machine.
FREE

Uploaded: 7/6/2015
If you come accross a pinch roller error on your Roland® VersaStudio BN-20, don't worry. This is a common problem when loading in media. In this video, Stahls' TV presenter Joe Burt will teach you how to fix this error and ensure a proper cut.
FREE

Uploaded: 7/6/2015
During the installation of your Roland® VersaStudio BN-20, you will be prompted to insert dummy cartridges. In this video, Stahls' TV presenter Joe Burt will show you just how to insert these cartridges in this quick and easy video.
FREE

Uploaded: 10/9/2014
Calibrating the sheet feed on your Roland® VersaStudio BN-20 helps prohibit overlapping or gaps in graphics. Stahls' TV Presenter, Steven Jackson demonstrates how to perform a test print to determine if you need to reset the current calibration values set for your print/cut machine.
FREE

Uploaded: 10/9/2014
After several uses and cleanings on the Roland® VersaStudio BN-20, your Window Utility software will alert you when it is time to replace your felt wiper. Stahls' TV Presenter, Steven Jackson shows you step-by-step how to use some tools and your Windows Utility to easily replace the felt wiper.
FREE

Uploaded: 10/9/2014
After so many cleanings on the Roland® VersaStudio BN-20, you will eventually need to replace the wiper that cleans off the machine's printhead. Stahls' TV Presenter, Steven Jackson shows you step-by-step how to use some tools and your Windows Utility to easily replace the wiper.
FREE

Uploaded: 10/9/2014
Before cutting on the Roland® VersaStudio BN-20, you can test your cut lines to ensure they are falling right outside of your print area. STAHLS’ TV Presenter, Steven Jackson demonstrates how to utilize the print/cut adjustment feature on your Roland BN-20 to achieve this.
FREE

Uploaded: 10/9/2014
When working with the Roland® VersaStudio BN-20, the cutting force will help determine whether your print/cut jobs come out clean with sharp edges. Stahls' TV Presenter, Steven Jackson demonstrates how to perform a test cut to ensure you have the correct force and pressure.
FREE

Uploaded: 10/3/2014
In order to keep the nozzles firing consistently and properly within your printhead, it is recommended to perform a nozzle check often or after heavy use. Stahls' TV Presenter, Steven Jackson demonstrates how to test your printhead by running a nozzle check through the Windows Utility for the Roland® VersaStudio BN-20.
FREE

Uploaded: 10/3/2014
If you are having inconsistent printing on your Roland® VersaStudio BN-20 , you may need to adjust your bi-directional print calibration settings. Stahls' TV Presenter, Steven Jackson shows you how to test your bi-directional printing settings and make adjustments if needed to ensure your prints are crisp & clean.
FREE

Uploaded: 10/3/2014
Using crop marks with the Roland® VersaStudio BN-20 print/cut machine are important for printing, laminating, then cutting your design. STAHLS' TV Presenter, Steven Jackson demonstrates how to test your crop marks and make adjustments using the Crop Cut Adjustment feature in the Roland VersaStudio software.
FREE

Uploaded: 9/23/2014
The Roland® VersaStudio BN-20 does a great job of keeping its' print head clean. Stahls' TV Presenter, Steven Jackson explains how to supplement the automatic maintenance cycle to keep prints perfect every time.
FREE

Uploaded: 9/23/2014
When working with varying heat transfer or sign vinyl, you may need to adjust the blade depth on your Roland® VersaStudio BN-20. Stahls' TV Presenter, Steven Jackson shows you how to adjust the blade to the recommended depth for cutting materials.
FREE

Uploaded: 9/23/2014
Replacing the waste cartridge on your Roland® VersaStudio BN-20 can be done quickly and easily. Stahls' TV Presenter, Steven Jackson demonstrates how easy it is to remove the old cartridge and replace with the new.
FREE